axial rotation

英 [ˈæksiəl rəʊˈteɪʃn]

美 [ˈæksiəl roʊˈteɪʃn]

网络  绕轴自转; 自转; 轴向转动; 轴向旋转; 绕轴旋转

英英释义

noun

• rotary motion of an object around its own axis
  1. wheels in axial rotation
  Synonym:axial motionroll

双语例句

• In the role of air power, the turbine rotation, through the screw into the axial rotation movement, lift the fuse of insurance.
  在空气动力作用下，涡轮旋转，通过螺纹将转动转化成轴向运动，解除引信的保险。
• Roundness error is the variation between the ideal circle and the profile of the cross section, which is perpendicular to the axial line of solid rotation, the value of roundness error affect the rotary precision, the centring precision and the reliability of fastened conjunction directly.
  圆度误差是指在垂直于回转体轴线截面上的轮廓对其理想圆的变动量，误差值的大小直接关系到孔轴配合的回转精度、定心精度以及紧固连接的可靠性。
• Result: The angular range of motion and neutral zone during flexion, extension, lateral bending and axial rotation at C1-C2 after replacement with artificial atlanto-odontoid joint were proved no significantly difference as compared with intact spine.
  结果：人工寰齿关节置换术后，屈伸、侧屈和旋转运动的中性区以及屈伸和侧屈运动范围较齿状突切除术后明显减小，各运动范围和中性区接近正常状态。
• Lateral bending plus axial rotation yielded the highest increase in fiber strains, followed by axial rotation plus flexion or axial rotation plus extension.
  在轴向旋转加屈曲或轴向旋转加伸展时，侧弯加轴向旋转是纤维强度增强的最大。
• Spatial Axial Rotation Symmetry of Physical Properties of Crystals
  晶体物理性质的空间轴转动对称性
• Conclussion: Spine without instability in the anterior and middle columes fixed with TLS increases significantly in flexion, extension, lateral bending and axial rotation stability, especially in rotation.
  结论：在无明显前中柱不稳时，TLS固定后脊柱的前屈、后伸、侧弯和旋转的稳定性明显增加，尤其旋转增加较多；
• Motions of flexion/ extension, lateral bending and axial rotation were produced by six pure moments with maximum of 10.0N · m and measured with stereophotogrammetry.
  对标本施加最大为10.0N.m的力偶矩，使之产生前屈、后伸、左右侧屈和左右轴向旋转运动，并由双平面立体测量的计算机图像分析系统得到节段运动范围。
• The stability with wire fixation was greater and equal to in flexion and in extension, lateral bending and axial rotation respectively.
  棘突钢丝固定在前屈运动方向上可加强节段的稳定性，可恢复节段在后伸、侧弯和轴向旋转运动方向上的稳定性；
• The fact joints of L3-L4 segment increase in flexion and extension 200 positions and decrease in axial rotation.
  L3&L4节段小关节面在前屈和后伸20°时受力增大，轴向旋转时受力减小。
• The measured variables were axial rotation, varus angulation, lateral translation, and anterior translation.
  测量变量为轴向旋转、内翻角、外向平移和前向平移。